e-Elit - leading
electronic and automation component
online distributor

	Items:	Total:
	0	€0.00

Show all products categ.

Need assistance?

Analog I/O Module MicroLogix, 4-ch. 2in/2out, 0..10VDC/ 4..20mA, Allen-Bradley

DESCRIPTIONS
MicroLogix™ Analog I/O Module, Number Of Channels: 4 (2 Differential Input, 2 Single-Ended), Input: Common Mode: Plus/Minus 27 V, Non-Linearity: Plus/Minus 0.12%, Protection: Plus/Minus 32 MA, Plus/Minus 30 V, Output: Protection: Plus/Minus 32 MA, Load Range On Voltage Output: Greater Than 1 KOHM, Reactive Load Current Output: Less Than 0.1 MH, Reactive Load Voltage Output: Less Than 1 MFD, Output Ripple Range 0 - 500 HZ: Less Than Plus/Minus 0.1%, Non-Linearity: Less Than Plus/Minus 0.59%, Voltage Rating: Analog Normal Operating Range Voltage: 0 - 10 VDC, Full Scale Analog Range Voltage: 0 - 10.5 VDC, Current Rating: Analog Normal Operating Range Current: 4 - 20 MA, Full Scale Analog Range Current: 0 - 21 MA, Isolation: 30 VAC/30 VDC Rated Working Voltage (IEC Class 2 Reinforced Insulation), Type Test: 500 VAC Or 707 VDC For 1 MIN, Enclosure: IP20, Rfi Suppression: Radiated: 10 V/M With 1 KHZ Sine-Wave 80% AM From 80 - 2700 MHZ, Conducted: 10 VRMS With 1 KHZ Sine-Wave 80% AM From 150 KHZ - 80 MHZ, Connection Cables: Belden 8761, Mounting: DIN Rail, Panel, Length: 1.59 IN, Width: 3.425 IN, Height: 3.543 IN, Temperature Rating: -4 To 149 DEG F, Environmental Conditions: Relative Humidity: 5 - 95% (Non-Condensing), Vibration: 5 G, Shock - Operating: 30 G, Non-Operating: 50 G (Panel Mount), 40 G (DIN Mount), Accuracy: Typical Input: Plus/Minus 0.55% Full Scale At -20 to 65 DEG C, Plus/Minus 0.3% Full Scale At 25 DEG C, Typical Output: Plus/Minus 1.17% Full Scale At -20 to 65 DEG C, Plus/Minus 0.5% Full Scale At 25 DEG C, Bus Rating: Bus Current Draw: 40 MA At 5 VDC, 105 MA At 24 VDC, Impedance: Input Impedance - Voltage Terminal: 200 KOHM, Current Terminal: 250 OHM, Resistance: Resistive Load On Current Output: 0 - 500 OHM, Indicator: LED, Rejection Ratio: Common Mode Rejection: Greater Than 55 DB At 50 And 60 HZ, Surge Transient Immunity: Plus/Minus 1 KV Shielded Line-Earth (CM) On Signal Ports, Resolution: 12 Bits (Unipolar), Standard/Approvals: C/US UL listed, UL 508, UL 1604, CSA C22.2, file number 213, CE marked, class I, division 2, hazardous location, groups A, B, C, D, C-tick, GOST_R, KCC certified, marine-ABS, marine-BVS, marine-GL, marine-KRS, marine-LR, ROSTECHNADZOR

SPECIFICATIONS

Item Name: Analog I/O Module
Sub Brand: MicroLogix™
Number Of Channels: 4 (2 Differential Input, 2 Single-Ended)
Input: Common Mode: Plus/Minus 27 V, Non-Linearity: Plus/Minus 0.12%, Protection: Plus/Minus 32 MA, Plus/Minus 30 V
Output: Protection: Plus/Minus 32 MA, Load Range On Voltage Output: Greater Than 1 KOHM, Reactive Load Current Output: Less Than 0.1 MH, Reactive Load Voltage Output: Less Than 1 MFD, Output Ripple Range 0 - 500 HZ: Less Than Plus/Minus 0.1%, Non-Linearity: Less Than Plus/Minus 0.59%
Voltage Rating: Analog Normal Operating Range Voltage: 0 - 10 VDC, Full Scale Analog Range Voltage: 0 - 10.5 VDC
Current Rating: Analog Normal Operating Range Current: 4 - 20 MA, Full Scale Analog Range Current: 0 - 21 MA
Isolation: 30 VAC/30 VDC Rated Working Voltage (IEC Class 2 Reinforced Insulation), Type Test: 500 VAC Or 707 VDC For 1 MIN
Enclosure: IP20
Rfi Suppression: Radiated: 10 V/M With 1 KHZ Sine-Wave 80% AM From 80 - 2700 MHZ, Conducted: 10 VRMS With 1 KHZ Sine-Wave 80% AM From 150 KHZ - 80 MHZ
Connection Cables: Belden 8761
Mounting: DIN Rail, Panel
Length: 1.59 IN
Width: 3.425 IN
Height: 3.543 IN
Temperature Rating: -4 To 149 DEG F
Environmental Conditions: Relative Humidity: 5 - 95% (Non-Condensing), Vibration: 5 G, Shock - Operating: 30 G, Non-Operating: 50 G (Panel Mount), 40 G (DIN Mount)
Accuracy: Typical Input: Plus/Minus 0.55% Full Scale At -20 to 65 DEG C, Plus/Minus 0.3% Full Scale At 25 DEG C, Typical Output: Plus/Minus 1.17% Full Scale At -20 to 65 DEG C, Plus/Minus 0.5% Full Scale At 25 DEG C
Indicator: LED
Surge Transient Immunity: Plus/Minus 1 KV Shielded Line-Earth (CM) On Signal Ports
Resolution: 12 Bits (Unipolar)
Impedance: Input Impedance - Voltage Terminal: 200 KOHM, Current Terminal: 250 OHM
Bus Rating: Bus Current Draw: 40 MA At 5 VDC, 105 MA At 24 VDC
Resistance: Resistive Load On Current Output: 0 - 500 OHM
Rejection Ratio: Common Mode Rejection: Greater Than 55 DB At 50 And 60 HZ

FEATURES
The 1762 MicroLogix expansion I/O modules are compatible with MicroLogix 1100, MicroLogix 1200, and MicroLogix 1400 controllers. Install the expansion I/O modules to the right of the controller, either on a panel with two mounting screws or on a DIN rail. Use analog I/O modules in many combinations, up to the maximum supported by the controller. The current loading capacity of the controller’s built-in power supply may limit the actual number of I/O modules that can be connected to the controller.
Integrated high-performance I/O bus
Software keying to prevent incorrect positioning within the system
Finger-safe terminal blocks for I/O wiring
Label to record I/O terminal designations
Network support includes EtherNet/IP, DeviceNet, and DH-485 (local only)
Standards: C/US UL listed, UL 508, UL 1604, CSA C22.2, file number 213, CE marked, class I, division 2, hazardous location, groups A, B, C, D, C-tick, GOST_R, KCC certified, marine-ABS, marine-BVS, marine-GL, marine-KRS, marine-LR, ROSTECHNADZOR